This is an old revision of the document!

Table of Contents

MyCloud Pro

The MyCloud Pro is designed for two desktop 3.5“ SATA hard drives. It provides safe and secure network storage plus the ability to easily share your digital content with family and friends. Stream content within your local network to any available UPnP-AV and DLNA device (e.g. PS3, iTunes, Windows 7, etc.). Remotely access your files through any internet connected computer or through our free iPhone, iPad and Android apps.

CPU
  • Intel Atom processor D525 (Dual-core 1.8GHz, 1MB Cache)
Memory
  • 1GB DDR3-800 SODIMM
Internal hard drive(s)
  • 3.5” SATA-I, SATA-II or SATA-III hard drives
  • Capacity 80GB - 4TB (supports large volumes in excess of 2TB)
  • XFS file system
Front I/O
  • 2 x HDD LEDs per tray (power & data access)
  • 1 x Power button
  • 1 x System LED
  • 2 x HDD LEDs (data access)
  • 1 x Backup LED
  • 1 x Backup button
  • 1 x USB 2.0 host connector
Rear I/O
  • 1 x Power receptacle
  • 1 x RJ45 connector (10/100/1000) with two LEDs for link and activity
  • 2 x USB 3.0 host connector
  • 1 x Reset button

Front View

HDD LED
Blue Power ON
Flashing orange Data access
Front Panel
Power switch (blue when turned on)
OS
  • Green = System ready
  • Flashing green = System is starting up
  • Flashing orange = System is shutting down
Flashing orange = Data access
  • Orange = USB drive connected (front port only)
  • Flashing orange = File copy from USB drive to NAS (front port only)
USB 2.0 host port
USB copy button
Press and hold the copy button for one second to copy the files from the USB drive on the front port to the PUBLIC folder on the network drive.

Rear View

DC 12V Power receptacle (DC +12V/5A)
USB 3.0 host port
Gigabit Ethernet port
Reset System reset button
To reset the configurations (e.g. admin password, DHCP settings, preferences, etc.), make sure the power is ON and the system is running. Press and hold the Reset button for 12 seconds and then release it.

Power ON/OFF Procedure

Connect the power supply to your device first and only then plug it into the wall socket. To turn on the device, press the power switch to start up the system. It takes about 1-2 minutes for the device to go online. The green system LED (OS) indicates when the system is ready.

To safely turn off the device, press and hold the power switch for 3 seconds until the system LED (OS) starts flashing. The system then shuts down all services and about 20 seconds later, it will power down.

If for some reason the system is unresponsive, press and hold the power switch for 6 seconds to forcefully shut down the system and cut off the power.

If the device is not in use for long periods of time, we recommend that you turn off the device and remove the power supply from the wall socket.

HDD Installation

Push the protruding left edge of the tray handle in to release the tray and use the handle to pull out the tray.

Install the hard drive, making sure the connector is facing the open side of the bracket. Slide the tray back into the enclosure and push the handle lightly into place.


Trace: • mycloud_pro

ebook

AKiTiO MyCloud eManual
for iPad, Nook, Sony Reader, etc.

ePub format