Differences

This shows you the differences between two versions of the page.

--- mycloud_pro [2012/11/05 03:16]
127.0.0.1 external edit
+++ mycloud_pro [2013/10/28 15:39]
Stefan
@@ Line 61: / Line 61: @@
 <note>To reset the configurations (e.g. admin password, DHCP settings, preferences, etc.), make sure the power is ON and the system is running. **Press and hold the Reset button for 12 seconds** and then release it.</note>
+<note>The fan starts when the CPU temperature reaches 70ºC or the disk temperature reaches 55ºC. It stops when the temperature of both the CPU and the disk drops below 45ºC.</note>
 ==== Power ON/OFF Procedure ====
 Connect the power supply to your device first and only then plug it into the wall socket. To turn on the device, press the power switch to start up the system. It takes about 1-2 minutes for the device to go online. The green system LED (OS) indicates when the system is ready.
-To safely turn off the device, press and hold the power switch for 3 seconds until the system LED (OS) starts flashing. The system then shuts down all services and about 20 seconds later, it will power down.
+To safely turn off the device, press the power switch for about 1 second until the system LED (OS) starts flashing. The system then shuts down all services and about 20 seconds later, it will power down.
 If for some reason the system is unresponsive, press and hold the power switch for 6 seconds to forcefully shut down the system and cut off the power.

Trace: